Best Deicing Cables
of Jan 2025

HEATIT JHSF1 CT Self Reglating Pre asembled Pipe Heating Cable

9.2
More Info

The HEATIT JHSF1 CT Self Regulating Pre-assembled Pipe Heating Cable is a superior product designed to protect pipes and roofs from cold weather damage. ETL approved and suitable for use on plastic an...d metal water pipes, this industrial-grade self-regulating heating cable is safe and reliable to use. The cable output will automatically adjust based on the ambient temperature at each point along the cable, eliminating any risk of overheating. Made with fluoropolymer - one of the toughest plastic materials - the HEATIT JHSF1 CT Self Regulating Pre-assembled Pipe Heating Cable can be used in underwater applications. Users must keep the connection between the orange cold lead and black heating cable above the water as it includes end seal meeting waterproof IP68. Additionally, the cables are configured for use in non-hazardous and hazardous locations, including areas where corrosives may be present. This product can protect pipes up to 2 1/2 inches in diameter, and for better freeze protection, at least a half-inch thick or thicker insulation material is recommended, especially for extremely cold weather. If the ambient temperature is lower than -20°F(-29°C), one-inch thick insulation material should be used. Pre-assembled and including grounded plug with light, HEATIT JHSF1 CT Self Regulating Pre-assembled Pipe Heating Cable is easy to install and use without a built-in thermostat. It runs on 120 volts and has an output of 5 watts/ft at 50 degrees F for pipe freeze protection. For roof deicing applications, the HEATIT JHSF1 CT Self Regulating Pre-assembled Pipe Heating Cable can be used on all types of roofs, including flat, metal, asphalt, rubber, slate, stone, ceramic, and composite roofs. Rated at 6W/ft at 32°F (0°C) for roof deicing, clips and hangers may need to be purchased separately. To ensure that the heating cable is properly functioning, users can test the cable before installation. Uncoil the cable and plug it in. Within a few minutes, users will feel a slight warmth on the heating cable, indicating that it is working correctly. In summary, the HEATIT JHSF1 CT Self Regulating Pre-assembled Pipe Heating Cable is a reliable and efficient product designed to protect pipes and roofs from cold weather damage. With its industrial-grade self-regulating heating cable, strong build, and easy installation process, this product is a must-have for homeowners in cold climates.

Easy Heat ADKS 1200 240 1200 Watts 120 V

8.8
More Info

The Easy Heat ADKS 1200 240 1200 Watts 120 V deicing cables are a must-have for homeowners looking to protect their roofs from the damages caused by snow and ice buildup. The cables are designed to pr...

Prime Wire Cable RHC1000W200 ROOF Gutter

8.6
More Info

Prime Wire & Cable RHC1000W200 ROOF & Gutter de-icing kit is a must-have product for homeowners and businesses alike. The de-icing cables in this kit can prevent costly damage caused by ice dams formi...

Thermal Resources Management Self Regulating De Icing Roof Heating Cable

8
More Info

The TRM Heating Cable 240 Volts – 6 Feet Long with 6 Feet Cold Lead is an exceptional product that has been designed to manage thermal resources efficiently. The self-regulating heating cable can ad...just its heat output based on the surrounding temperature and can vary its heat output along the cable’s entire length, saving energy and eliminating hot spots along the pipe. This technology makes it an ideal solution for freeze protection, sprinkler tracing, roof and gutter de-icing, heat loss replacement, and frost heave prevention in commercial or residential applications. The TRM heating cable is a cost-effective solution for most heat tracing applications. It comes with a range of fastening products that can be designed to match your project’s specific requirements. Furthermore, the cable is designed to be crossed or overlapped to suit the specific site conditions, making it an ideal solution for complex projects. The cable is heavy-duty and built to last. It has an inner insulation jacket and an exterior fluoropolymer jacket that provides more durability than most heat tracing cables. This makes it suitable for both commercial and residential applications. The cable has been manufactured to withstand harsh weather conditions and can be installed on shingled roofs, metal roofs, asphalt roofs, flat roofs, and more. The TRM Heating Cable is also energy-efficient. The cable is self-regulating and can adjust its heat output. This means that the cable uses less energy when it is warm outside and more energy when it gets colder. The cable generates 8 watts per foot at 10 degrees Celsius, and when cables are surrounded by ice and snow, the cables will generate 12 watts per linear foot. The cable comes pre-assembled with a 6’ cold lead and hard wired connection for easy installation. The cables are designed to be crossed and overlapped without concern for short circuit or burnout. Furthermore, the cable can function safely without the use of controls, and it is recommended to utilize thermostats or controllers to maximize the efficiency of the cables while minimizing the electrical costs. TRM is an industry-leading, Canadian-owned designer and manufacturer of premium heating cable and systems in the commercial, industrial, and residential sectors. They back their product with a manufacturer’s warranty of 2 years from the date of purchase. In conclusion, the TRM Heating Cable is an excellent investment for those looking for a cost-effective, energy-efficient, and durable solution for managing thermal resources. It is an ideal solution for freeze protection, sprinkler tracing, roof and gutter de-icing, heat loss replacement, and frost heave prevention in commercial or residential applications.

HEATIT JHSF1 Self Regulating Pre Assembled Heating Cable 150 feet

9.4
More Info

The HEATIT JHSF1 Self Regulating Pre Assembled Heating Cable is a high-quality product designed to provide reliable protection against freezing for water pipes, as well as maintain water temperature i...n the supply piping system. Its industrial-grade self-regulating heating cable is ETL approved and is suitable for use on plastic and metal water pipes, including inlet pipes, drain pipes, palm tree frost protection, and sewer piping. One of the standout features of the HEATIT JHSF1 is its capability to adjust the cable output automatically based on the ambient temperature at each point along the cable. This feature helps to eliminate the risk of overheat and makes it safer for use, allowing you to use it with peace of mind. The self-regulating heating cable can be used by straight, spiral, and overlap, making it more functional than other heating cable products on the market. It can protect pipes up to 2.5 inches in diameter and is recommended for use with at least 1/2 inch thick insulation material for better freeze protection. In extremely cold weather, the use of 1” thick insulation material is recommended. The heating cable is rated at 50 degrees F for pipe freeze protection, allowing you to use it for a wide range of applications. For roof deicing applications, the HEATIT JHSF1 can be used on various roof types, such as flat roofs, metal roofs, asphalt roofs, rubber roofs, slate roofs, stone roofs, metal roofs, ceramic roofs, composite (tar and gravel) roofs, etc. The cable is rated at 10W/ft at 32°F (0°C) for roof deicing, and you may need to buy clips and hangers separately. Another useful feature of the HEATIT JHSF1 is its ability to maintain water temperature in the supply piping system, reducing or eliminating the delay in obtaining hot water at each fixture. By wrapping the self-regulating heating cable around your hot water lines within the house, you get instant hot water, making it an energy-efficient and economical alternative to common re-circulation systems. Before installation, it's recommended that you test the cable by uncoiling it and plugging it in. You should be able to feel a slight warmth on the heating cable within a few minutes. Finally, the product comes with a two-year limited warranty. If you're not satisfied with the HEATIT JHSF1 heating cable, you can contact the manufacturer for support. Overall, if you're looking for a reliable heating cable product, the HEATIT JHSF1 is a great choice.

HEATIT HIRD 200 feet 5 Watts Per Foot

8.8
More Info

If you're worried about ice dams forming on your roof during the winter months, consider using the HEATIT HIRD 200 feet 5 Watts per Foot heating cable. This product has been both CSA and ETL approved,...

Heatizon GutterMelt 9 Watts Per Foot Roof

8.2
More Info

Ice dams can cause significant damage to your roof, gutters, and downspouts, resulting in serious problems like water damage or roof collapse. That's where Heatizon's GutterMelt 9 Watts per Foot Roof ...